Skip to main content

Grade comparison

Liquid silicone rubber (LSR) grades

A selection of 43 NuSil™ two-part silicone systems used with injection molding equipment, grouped as in the product catalog. Open a grade for its full typical properties and test methods, or select grades to request documents, samples or a quotation.

BIO Corporation is an authorized NuSil™ Channel Partner serving medical-device teams in China.

Liquid silicone rubber (LSR) grades: typical values from each grade's TDS
SelectProduct codeDurometer scale per gradeTensile strength MPa (psi)Elongation %Tear strength kN/m (ppi)TDS
Implant-related materials 13 grades
MED-48057Type A3.4 (485 psi)108012.4 (70 ppi)2019 · Rev. B
MED-481011Type A4.8 (700 psi)107511.5 (65 ppi)2018 · Rev. B
MED-481515Type A6.4 (925 psi)97522.0 (125 ppi)2007
MED-482020Type A6.3 (910 psi)87522.0 (125 ppi)2018 · Rev. B
MED-483030Type A9.3 (1350 psi)75026.5 (150 ppi)2020 · Rev. D
MED-484043Type A8.2 (1190 psi)56043.2 (245 ppi)2022 · Rev. D
MED-484244Type A7.4 (1070 psi)40044.1 (250 ppi)2018 · Rev. B
MED-485050Type A10.0 (1455 psi)70042.3 (240 ppi)2020 · Rev. C
MED1-485555Type A7.6 (1100 psi)47542.3 (240 ppi)2025 · Rev. C
MED-486060Type A9.3 (1350 psi)53045.0 (255 ppi)2018 · Rev. B
MED-487070Type A10.3 (1500 psi)41540.6 (230 ppi)2018 · Rev. B
MED-488080Type A7.1 (1030 psi)26515.9 (90 ppi)2018 · Rev. B
Durometer on Type 00 not comparable with Type A readings
MED-480138Type 002.0 (290 psi)11409.7 (55 ppi)—
Medical-device-related materials 15 grades
MED-49057Type A4.5 (650 psi)110012.3 (70 ppi)2024 · Rev. C
MED-491010Type A4.8 (700 psi)100011.5 (65 ppi)2024 · Rev. C
MED-491515Type A6.4 (925 psi)975—2006
MED-492020Type A5.8 (840 psi)87022.0 (125 ppi)2024 · Rev. C
MED-493030Type A9.3 (1350 psi)73026.3 (150 ppi)2024 · Rev. D
MED30-4940-135Type A6.7 (970 psi)57037.0 (210 ppi)2018 · Rev. B
MED-494040Type A8.2 (1190 psi)56043.4 (246 ppi)2020 · Rev. C
MED-494240Type A5.9 (850 psi)35022.9 (130 ppi)2019 · Rev. B
MED-495050Type A9.9 (1445 psi)70042.9 (243 ppi)2020 · Rev. C
MED1-495555Type A8.0 (1165 psi)49044.1 (250 ppi)2024 · Rev. C
MED-496060Type A9.0 (1300 psi)52544.1 (250 ppi)2018 · Rev. B
MED2-495561Type A—49044.1 (250 ppi)2019 · Rev. D
MED-497070Type A9.1 (1325 psi)46542.3 (240 ppi)2018 · Rev. C
MED-498080Type A6.9 (1000 psi)25015.9 (90 ppi)2021 · Rev. C
Durometer on Type 00 not comparable with Type A readings
MED-490140Type 002.0 (285 psi)11359.7 (55 ppi)2018 · Rev. B
Industrial and engineering materials 10 grades
LSR-58057Type A3.1 (450 psi)105010.6 (60 ppi)2008
LSR-581011Type A5.2 (750 psi)107512.3 (70 ppi)2008
LSR-581515Type A6.9 (1000 psi)100022.0 (125 ppi)2008
LSR-582020Type A6.2 (900 psi)85022.0 (125 ppi)2008
LSR-583030Type A8.6 (1250 psi)75024.7 (140 ppi)2008
LSR-584040Type A7.6 (1100 psi)55044.1 (250 ppi)2008
LSR-585050Type A9.7 (1400 psi)66040.6 (235 ppi)2008
LSR-586060Type A9.0 (1300 psi)52545.9 (260 ppi)2008
LSR-587070Type A9.3 (1350 psi)400—2008
LSR-588080Type A6.6 (950 psi)25015.0 (85 ppi)2008
C6-series materials 5 grades
SIL-592019Type A7.5 (1080 psi)89015.9 (90 ppi)2014 · Rev. A
SIL-594041Type A9.4 (1365 psi)70029.0 (165 ppi)2014 · Rev. A
SIL-595050Type A10.0 (1450 psi)55031.7 (180 ppi)2014 · Rev. A
SIL-596060Type A9.0 (1300 psi)42535.2 (200 ppi)2014 · Rev. A
SIL-597068Type A8.6 (1250 psi)40039.7 (225 ppi)2014 · Rev. A

Select grades to request documents, samples or a quotation.

This table is a selection, not the complete NuSil™ LSR range. It lists grades with a product page on this site whose TDS describes a two-part silicone system used with injection molding equipment. Fluorosilicone grades are not included. Search by product code or ask BIO about a grade that is not listed.

Durometer is shown on the scale each TDS reports: Type A for 41 grades (7 to 80) and Type 00 for 2 grades (38 to 40). Readings on different scales are not comparable, so grades are ordered within one scale only.

Values are Typical data from each grade's TDS, shown with the year and revision of that document. They are not purchasing specifications, and test methods can differ between documents. Request the current TDS before design, purchasing or lot acceptance. Material data does not establish suitability for a finished device.

NuSil™ and Avantor® are trademarks of their respective owners. BIO is not the manufacturer.

No exact code yet? Submit application details