Skip to main content

Materials & Products

CV-1146-2

NuSil™ medical-grade silicone · supplied in China by BIO, an authorized NuSil™ Channel Partner

Product identification

Product identification

Use the complete product code when requesting documents, samples or a quotation.

Full product code
CV-1146-2
Matching reference
CV-1146-2 Product Profile / TDSDocument date 2018-12-06 · Revision C

Technical data

Typical properties and test methods

Request the current document for any missing data. Use only data for this product code.

Typical data from the reference TDS

CV-1146-2 Product Profile / TDS · Document date 2018-12-06 · Revision C

Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.

PropertyTypical valueTest method
Non-Volatile Content72%ASTM D2288
Viscosity2,400 cP / 2,400 mPasASTM D1084, D2196
Specific Gravity1.26ASTM D792
Dielectric Strength845 volts/mil / 33.3 kV/mmASTM D149
Collected Volatile Condensable Material (CVCM)0.04%ASTM E595
Total Mass Loss (TML)0.55%ASTM E595

Documents & lot records

Technical and lot documents

Request the current product documents and any lot-specific records required for your project.

  • Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.CV-1146-2 Product Profile / TDS · Document date 2018-12-06 · Revision C
  • Lot documentsRequest a CoA or other lot documents for your product code and lot.Available records depend on the product and lot

Request documents for this code

Using product information

Selection and validation

  • Typical data supports technical discussion; it is not a purchasing specification.
  • Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
  • Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
  • NuSil™ and Avantor® are trademarks of their respective owners. BIO is not the manufacturer.

Discuss your application

Submit CV-1146-2 and application details

Tell BIO about the component, contact conditions, process, expected volume and documents you need. Request application support, samples or a quotation.