Materials & Products
FS-3730-11
Fluorosilicone adhesive/sealant, dark gray
Product identification
Start with the exact code
Do not substitute a similar code. Documents, samples and quotations must use the complete code.
- Full product code
FS-3730-11- Product name
- Fluorosilicone adhesive/sealant, dark gray
- Matching reference
- FS-3730-11 Product Profile / TDSDocument date 2008-03-12
Product overview
Description and application scope
Material information supports screening; final selection still depends on the device, contact conditions, processing and finished-device validation.
Product characteristics
- Dark-grey, one-part, thixotropic RTV fluorosilicone.
- For evaluating bonding and sealing in solvent- and fuel-resistant environments.
- It is separate from white FS-3730 and has a different official product ID and documentation.
Application areas
- For component protection, bonding and sealing in gasoline, aviation-fuel or related solvent environments.
- Temperature range, surface preparation, priming and cure conditions must follow current controlled information and actual validation.
Technical data
Keep conditions and units attached
For omitted items, use the product document confirmed at request time; do not fill gaps from a similar code.
Typical data from the reference TDS
FS-3730-11 Product Profile / TDS · Document date 2008-03-12
Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.
| Property | Typical value | Test method |
|---|---|---|
| Appearance | Dark Gray | Not stated in this document |
| Specific Gravity | 1.48 | Not stated in this document |
| Durometer, Type A | 40 | Not stated in this document |
| Tensile Strength | 700 psi / 4.8 Mpa | Not stated in this document |
| Elongation | 275 % | Not stated in this document |
| Tear Strength | 50 ppi / 8.1 N/mm | Not stated in this document |
| Shear Strength, (primed with SP-120) | 275 psi / 1.9 Mpa | Not stated in this document |
Documents & lot records
Confirm documents by code
Document revisions and availability follow the written response to the request.
- Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.FS-3730-11 Product Profile / TDS · Document date 2008-03-12
- Lot documentsIf the project requires a CoA or another lot document, state it in the inquiry. Availability is confirmed for the code and actual lot.Confirmed by code and actual lot
Using product information
Keep the page boundary clear
- Typical data supports technical discussion; it is not a purchasing specification.
- Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
- Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
From code to device validation
Submit FS-3730-11 and application details
Provide the device component, contact conditions, process, expected volume and required documents. BIO will use the exact code to confirm documents, samples, quotation and lot-document scope.