Materials & Products
FS-3730
Fluorosilicone adhesive/sealant, white
NuSil™ medical-grade silicone · supplied in China by BIO, an authorized NuSil™ Channel Partner
Product identification
Product identification
Use the complete product code when requesting documents, samples or a quotation.
- Full product code
FS-3730- Product name
- Fluorosilicone adhesive/sealant, white
- Matching reference
- FS-3730 Product Profile / TDSDocument date 2018-12-20 · Revision B
Product overview
Description and application scope
Material information supports screening; final selection still depends on the device, contact conditions, processing and finished-device validation.
Product characteristics
- White, one-part, room-temperature-curing fluorosilicone adhesive and sealant.
- FS-3730 and dark-grey FS-3730-11 are separate products.
Application areas
- For evaluating sealing and bonding where solvent and/or fuel resistance is required.
- For component protection or bonding where gasoline or aviation fuel exposure is expected; the particular fluid, temperature and substrate require separate validation.
Technical data
Typical properties and test methods
Request the current document for any missing data. Use only data for this product code.
Typical data from the reference TDS
FS-3730 Product Profile / TDS · Document date 2018-12-20 · Revision B
Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.
| Property | Typical value | Test method |
|---|---|---|
| Appearance | White | ASTM D2090 |
| Extrusion Rate | 180 g/minute | ASTM C603 |
| Tack-Free Time | 25 minutes | ASTM C679 |
| Specific Gravity | 1.40 | ASTM D792 |
| Durometer, Type A | 33 | ASTM D2240 |
| Tensile Strength | 900 psi / 6.2 MPa | ASTM D412 |
| Elongation | 440% | ASTM D412 |
| Tear Strength | 55 ppi / 9.7 kN/m | ASTM D624 |
Documents & lot records
Technical and lot documents
Request the current product documents and any lot-specific records required for your project.
- Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.FS-3730 Product Profile / TDS · Document date 2018-12-20 · Revision B
- Lot documentsRequest a CoA or other lot documents for your product code and lot.Available records depend on the product and lot
Using product information
Selection and validation
- Typical data supports technical discussion; it is not a purchasing specification.
- Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
- Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
- NuSil™ and Avantor® are trademarks of their respective owners. BIO is not the manufacturer.
Discuss your application
Submit FS-3730 and application details
Tell BIO about the component, contact conditions, process, expected volume and documents you need. Request application support, samples or a quotation.