Materials & Products
GEL-8150
Product identification
Start with the exact code
Do not substitute a similar code. Documents, samples and quotations must use the complete code.
- Full product code
GEL-8150- Matching reference
- GEL-8150 Product Profile / TDSDocument date 2007-09-24
Technical data
Keep conditions and units attached
For omitted items, use the product document confirmed at request time; do not fill gaps from a similar code.
Typical data from the reference TDS
GEL-8150 Product Profile / TDS · Document date 2007-09-24
Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.
| Property | Typical value | Test method |
|---|---|---|
| Appearance | Translucent | Not stated in this document |
| Viscosity | 500 cP / 500 mPas | Not stated in this document |
| Work Time | 4 hours | Not stated in this document |
| Specific Gravity | 0.97 | Not stated in this document |
| Dielectric Strength | 500 volts/mil / 19.7 kV/mm | Not stated in this document |
| Dielectric Constant @ 100 Hz | 2.8 | Not stated in this document |
Documents & lot records
Confirm documents by code
Document revisions and availability follow the written response to the request.
- Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.GEL-8150 Product Profile / TDS · Document date 2007-09-24
- Lot documentsIf the project requires a CoA or another lot document, state it in the inquiry. Availability is confirmed for the code and actual lot.Confirmed by code and actual lot
Using product information
Keep the page boundary clear
- Typical data supports technical discussion; it is not a purchasing specification.
- Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
- Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
From code to device validation
Submit GEL-8150 and application details
Provide the device component, contact conditions, process, expected volume and required documents. BIO will use the exact code to confirm documents, samples, quotation and lot-document scope.