Materials & Products
MED-1555
Product identification
Start with the exact code
Do not substitute a similar code. Documents, samples and quotations must use the complete code.
- Full product code
MED-1555- Matching reference
- MED-1555 Product Profile / TDSDocument date 2011-03-24
Technical data
Keep conditions and units attached
For omitted items, use the product document confirmed at request time; do not fill gaps from a similar code.
Typical data from the reference TDS
MED-1555 Product Profile / TDS · Document date 2011-03-24
Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.
| Property | Typical value | Test method |
|---|---|---|
| Appearance | Translucent | Not stated in this document |
| Extrusion Rate | 230 g/min | Not stated in this document |
| Tack-Free Time | 15 minutes | Not stated in this document |
| Specific Gravity | 1.35 | Not stated in this document |
| Durometer, Type A | 35 | Not stated in this document |
| Tensile Strength | 820 psi (5.7 MPa) | Not stated in this document |
| Elongation | 400% | Not stated in this document |
| Tear Strength | 50 ppi (8.8 kN/m) | Not stated in this document |
| Lap Shear Strength | 200 psi (1.4 MPa) | Not stated in this document |
Documents & lot records
Confirm documents by code
Document revisions and availability follow the written response to the request.
- Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.MED-1555 Product Profile / TDS · Document date 2011-03-24
- Lot documentsIf the project requires a CoA or another lot document, state it in the inquiry. Availability is confirmed for the code and actual lot.Confirmed by code and actual lot
Using product information
Keep the page boundary clear
- Typical data supports technical discussion; it is not a purchasing specification.
- Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
- Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
From code to device validation
Submit MED-1555 and application details
Provide the device component, contact conditions, process, expected volume and required documents. BIO will use the exact code to confirm documents, samples, quotation and lot-document scope.