Materials & Products
MED-4765
High consistency silicone elastomer
Product identification
Product identification
Use the complete product code when requesting documents, samples or a quotation.
- Full product code
MED-4765- Product name
- High consistency silicone elastomer
- Matching reference
- MED-4765 Product Profile / TDSDocument date 2014-05-14 · Revision A
Product overview
Description and application scope
Material information supports screening; final selection still depends on the device, contact conditions, processing and finished-device validation.
Two-part, high-tear-strength silicone elastomer with heat-activated addition cure and a non-tacky surface.
Product characteristics
- Two-part, high tear strength silicone elastomer
- Firm silicone
- Thermally cures via addition cure chemistry
- Has non-tacky surface and no volatile byproducts or peroxide residues
- Strained through a minimum 200-mesh screen to reduce particulate contamination
Application areas
- Molding or extrusion of parts for healthcare applications
Technical data
Typical properties and test methods
For omitted items, use the product document confirmed at request time; do not fill gaps from a similar code.
Typical data from the TDS
MED-4765 Product Profile / TDS · Document date 2014-05-14 · Revision A
Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.
| Property | Typical value | Test method |
|---|---|---|
| Plasticity (Part A) | 125 mil / 3.2 mm | Not stated in this document |
| Plasticity (Part B) | 110 mil / 2.8 mm | Not stated in this document |
| Work Time | 6.0 hours | Not stated in this document |
| Specific Gravity | 1.20 | Not stated in this document |
| Durometer, Type A | 65 | Not stated in this document |
| Tensile Strength | 1,240 psi / 8.6 MPa | Not stated in this document |
| Elongation | 1,005% | Not stated in this document |
| Tear Strength | 265 ppi / 46.7 kN/m | Not stated in this document |
Documents & lot records
Technical and lot documents
Request the current product documents and any lot-specific records required for your project.
- Product Profile / TDSThis page cites public technical content from the product document. Confirm the currently issued revision and its scope when requesting it.MED-4765 Product Profile / TDS · Document date 2014-05-14 · Revision A
- Lot documentsIf the project requires a CoA or another lot document, state it in the inquiry. Availability is confirmed for the code and actual lot.Available records depend on the product and lot
Using product information
Selection and validation
- Typical data supports technical discussion; it is not a purchasing specification.
- Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
- Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
Discuss your application
Submit MED-4765 and application details
Tell BIO about the component, contact conditions, process, expected volume and documents you need. Request application support, samples or a quotation.