Skip to main content

Materials & Products

MED16-6606

NuSil™ medical-grade silicone · supplied in China by BIO, an authorized NuSil™ Channel Partner

Product identification

Product identification

Use the complete product code when requesting documents, samples or a quotation.

Full product code
MED16-6606
Matching reference
MED16-6606 Product Profile / TDSDocument date 2020 · Revision D

Technical data

Typical properties and test methods

Request the current document for any missing data. Use only data for this product code.

Typical data from the reference TDS

MED16-6606 Product Profile / TDS · Document date 2020 · Revision D

Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.

PropertyTypical valueTest method
Viscosity105 cP / 105 mPasASTM D1084, D2196
AppearanceTranslucentASTM D2090
Non-Volatile Content30%ASTM D2288
Specific Gravity1.12ASTM D792
Durometer, Type A20ASTM D2240
Tensile Strength1,240 psi / 8.5 MPaASTM D412
Elongation800%ASTM D412
Tear Strength120 ppi / 21.0 kN/mASTM D624

Documents & lot records

Technical and lot documents

Request the current product documents and any lot-specific records required for your project.

  • Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.MED16-6606 Product Profile / TDS · Document date 2020 · Revision D
  • Lot documentsRequest a CoA or other lot documents for your product code and lot.Available records depend on the product and lot

Request documents for this code

Using product information

Selection and validation

  • Typical data supports technical discussion; it is not a purchasing specification.
  • Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
  • Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
  • NuSil™ and Avantor® are trademarks of their respective owners. BIO is not the manufacturer.

Discuss your application

Submit MED16-6606 and application details

Tell BIO about the component, contact conditions, process, expected volume and documents you need. Request application support, samples or a quotation.