Materials & Products
MED2-4013
Fast-cure silicone adhesive
Product identification
Start with the exact code
Do not substitute a similar code. Documents, samples and quotations must use the complete code.
- Full product code
MED2-4013- Product name
- Fast-cure silicone adhesive
- Matching reference
- MED2-4013 Product Profile / TDSDocument date 2014-05-15 · Revision A
Product overview
Description and application scope
Material information supports screening; final selection still depends on the device, contact conditions, processing and finished-device validation.
Product characteristics
- Two-part, translucent, thixotropic fast-cure silicone adhesive.
- The 2023 SDS identifies MED2-4013 Part A and gives Silicone Adhesive as a synonym.
Application areas
- For evaluating silicone-to-silicone bonding and bonding or sealing between silicone and substrates such as metal.
- For production or prototype processes that require a long working window followed by heat cure.
Use limitations
- The 2014 manufacturer TDS identifies MED2-4013 as restricted and says it should not be considered for human implantation longer than 29 days.
- Suitability for a particular device, contact mode, sterilization method and regulatory pathway requires current controlled documentation and finished-device validation.
Technical data
Keep conditions and units attached
For omitted items, use the product document confirmed at request time; do not fill gaps from a similar code.
Typical data from the reference TDS
MED2-4013 Product Profile / TDS · Document date 2014-05-15 · Revision A
Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.
| Property | Typical value | Test method |
|---|---|---|
| Appearance | Translucent | Not stated in this document |
| Viscosity, Part A | 80,000 cP / 80,000 mPas | Not stated in this document |
| Work Time | 15 hours minimum | Not stated in this document |
| Specific Gravity | 1.12 | Not stated in this document |
| Durometer, Type A | 15 | Not stated in this document |
| Tensile Strength | 1,000 psi / 6.9 Mpa | Not stated in this document |
| Elongation | 800% | Not stated in this document |
Documents & lot records
Confirm documents by code
Document revisions and availability follow the written response to the request.
- Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.MED2-4013 Product Profile / TDS · Document date 2014-05-15 · Revision A
- Lot documentsIf the project requires a CoA or another lot document, state it in the inquiry. Availability is confirmed for the code and actual lot.Confirmed by code and actual lot
Using product information
Keep the page boundary clear
- Typical data supports technical discussion; it is not a purchasing specification.
- Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
- Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
From code to device validation
Submit MED2-4013 and application details
Provide the device component, contact conditions, process, expected volume and required documents. BIO will use the exact code to confirm documents, samples, quotation and lot-document scope.