Materials & Products
R-2630
Product identification
Start with the exact code
Do not substitute a similar code. Documents, samples and quotations must use the complete code.
- Full product code
R-2630- Matching reference
- R-2630 Product Profile / TDSDocument date 2013-01-29
Technical data
Keep conditions and units attached
For omitted items, use the product document confirmed at request time; do not fill gaps from a similar code.
Typical data from the reference TDS
R-2630 Product Profile / TDS · Document date 2013-01-29
Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.
| Property | Typical value | Test method |
|---|---|---|
| Appearance | Black | ASTM D2090 |
| Work Time | 15 hours | Not stated in this document |
| Specific Gravity | 1.10 | ASTM D792 |
| Durometer, Type A | 60 | ASTM D2240 |
| Tensile Strength | 690 psi (4.7 MPa) | ASTM D412 |
| Elongation | 95% | ASTM D412 |
| Tear Strength | 40 ppi (7.0 kN/m) | ASTM D624 |
| Volume Resistivity | 6 ohm·cm | ASTM D257, D4496 |
Documents & lot records
Confirm documents by code
Document revisions and availability follow the written response to the request.
- Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.R-2630 Product Profile / TDS · Document date 2013-01-29
- Lot documentsIf the project requires a CoA or another lot document, state it in the inquiry. Availability is confirmed for the code and actual lot.Confirmed by code and actual lot
Using product information
Keep the page boundary clear
- Typical data supports technical discussion; it is not a purchasing specification.
- Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
- Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
From code to device validation
Submit R-2630 and application details
Provide the device component, contact conditions, process, expected volume and required documents. BIO will use the exact code to confirm documents, samples, quotation and lot-document scope.