Skip to main content

Materials & Products

R31-2186

NuSil™ medical-grade silicone · supplied in China by BIO, an authorized NuSil™ Channel Partner

Product identification

Product identification

Use the complete product code when requesting documents, samples or a quotation.

Full product code
R31-2186
Matching reference
R31-2186 Product Profile / TDSDocument date 2019-01-02 · Revision B

Technical data

Typical properties and test methods

Request the current document for any missing data. Use only data for this product code.

Typical data from the reference TDS

R31-2186 Product Profile / TDS · Document date 2019-01-02 · Revision B

Values are shown in the document's original units. They are Typical data, not purchasing specifications. Values from different methods or conditions are not directly equivalent.

PropertyTypical valueTest method
AppearanceTranslucentASTM D2090
Viscosity, Part A82,000 cP / 82,000 mPasASTM D1084, D2196
Flow (0.375” plunge for 5 minutes)0.5 inches / 1.3 cmASTM D2202
Extrusion Rate, Part A5 g/minuteASTM C603
Extrusion Rate, Part B20 g/minuteASTM C603
Work Time15 minutesNot stated in this document
Specific Gravity1.12ASTM D792
Durometer, Type A20ASTM D2240

Documents & lot records

Technical and lot documents

Request the current product documents and any lot-specific records required for your project.

  • Product Profile / TDS referenceThe date identifies the reference used on this page; it does not establish the current revision, supply or a regulatory conclusion.R31-2186 Product Profile / TDS · Document date 2019-01-02 · Revision B
  • Lot documentsRequest a CoA or other lot documents for your product code and lot.Available records depend on the product and lot

Request documents for this code

Using product information

Selection and validation

  • Typical data supports technical discussion; it is not a purchasing specification.
  • Material-level information is not finished-device approval. Suitability depends on the exact code, contact conditions and final device validation.
  • Lot documents apply to a specific production lot. Confirm current documents before design or acceptance.
  • NuSil™ and Avantor® are trademarks of their respective owners. BIO is not the manufacturer.

Discuss your application

Submit R31-2186 and application details

Tell BIO about the component, contact conditions, process, expected volume and documents you need. Request application support, samples or a quotation.